1.45MPixel CCD camera - CB140MCL/CM140MCL

JAI CB-140MCL/CM-140MCL CCD camera

The new CB-140MCL and CM-140MCL are digital progressive scan 1.4 megapixel CCD cameras with a new digital Mini Camera Link (MCL) interface. Based upon the design for Jai's popular analog CV-A1 and CV-A2 cameras this camera comes loaded with features such as optional Power over Camera Link (PoCL), auto-iris, control tool and an automatic LVAL synchronous / asynchronous operation. Both cameras are offered in either monochrome (CM-140MCL) or colour (CB-140MCL).

The JAI CB-140MCL/CM-140MCL features a large high sensitivity ½" CCD sensor and operates at up to 31 frames a second at full SXGA resolution (1380 (h) x 1040 (v) active pixels) in continuous operation mode. This differentiates this camera as one of the fastest high performance cameras in its class.

The JAI CB-140MCL/CM-140MCL CCD camera comes with a new MCL (mini CameraLink) interface allowing a host of new advantages including reduced size and a new Power over CameraLink (PoCL) feature. The CB-140MCL and CM-140MCL have a compact 29x44x66mm body which matches the size of the analog models allowing machine vision users to easily convert from analog to the newer digital range without timely and costly mechanical/optical redesign. JAI's new optional PoCL feature cleans up the problems of having messy cable clutter with its clean one-connector solution at no extra cost.

JAI's CB-140MCL/CM-140MCL CCD camera also comes with a smart automatic Iris function making it suited for most outdoor applications. In an outdoor application such as traffic infringement or surveillance where varying levels of sunlight can be a barrier the camera can automatically adjust to a wide range of light levels.

The JAI CB-140MCL/CM-140MCL CCD camera comes with easy-to-use control software for camera configuration and setup. This connectivity from the software to the camera runs over the CameraLink connection and so requires no extra cables. The software communicates with the camera using ascii commands so industry standard communications packages such as HyperTerminal can also be used or a user may choose to write his own communications easily and simply.

A new function implemented in the CB-140MCL/CM-140MCL CCD camera allows the camera to be triggered while the CCD sensor is still reading out. Typically this would cause reset feed-through on the video signal causing a corrupted image. This new feature avoids this problem while still allowing for asynchronous trigger mode.

Typical application areas for the CB140MCL / CM140MCL include:

• Automotive inspection (e.g. High accuracy gauging & process verification)
  
• Pharmaceutical inspection (e.g. blister pack content, fluid fill levels)
  
• Beverage industry (e.g. inspection of defective bottles and fill levels)
  
• Food sorting
  
• Electronics inspection

JAI's CB-140MCL CCD camera overshadows its competitors with good frame speeds, resolution levels and a new MCL function packed with quality features suited for most tight-fit and demanding machine vision applications.

Adept Electronic Solutions are the machine vision and imaging specialist providing expert advice and timely support. To find out more about the JAI CB-140MCL/CM-140MCL CCD camera or any model from JAI's range of cameras please contact us or call us at Tel Sydney (02) 99792599 / Perth (08) 92425411